PHANTOM 4 PRO

Dumas Taylorcraft Electric Airplane Kit RC Airplane

Price: $65.95 $63.88
Product prices and availability are accurate as of 2017-09-23 15:38:30 CDT and are subject to change. Any price and availability information displayed on http://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
You Save: $2.07 (3%)
Availability: In Stock
Usually ships in 2-3 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

This is the radio controlled, electric powered Dumas Taylorcraft Park Flyer Kit.
Features:

Construction: Hand selected laser cut balsa
Vacuum molded cowl
Rudder and Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front tail wire skid requires bending
Includes:

All balsa lightweight colored (blue and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels tail wire skid lightweight plastic tail wheel CA hinges and all hardware to complete kit instruction manual two full-size plan sheets acetate sheet for windows and vacuum molded cowl.
Requires:

GWS IPS (indoor power system) motor with "A" ratio gear drive
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC GWSM2059
2 cell 700mAh LiPo battery
GWS 8x6 prop GWSQ2017
Building and field equipment
Specs:

Length: 23-7/8" (606mm)
Wingspan: 40" (1016mm)
Wing Area: 272sq.in. (17.57 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-7/8" (48mm) back from the leading edge of the wing
Control Throws- Elevator Up and Down: 3/4" (19mm) Rudder Left and Right: 7/8" (22mm)

This product is compatible with the following Model(s): Dumas 1814,

Product Features

This is the radio controlled, electric powered Dumas Taylorcraft Park Flyer Kit. Features: • Construction: Hand selected laser cut balsa • Vacuum molded cowl • Rudder and Elevator Control: Wire pushrod • Servo Placement: Mounted in rails on fuselage • Landing Gear: 1/16" diameter wire front, tail wire skid requires bending Includes: • All balsa, lightweight colored (blue and yellow) tissue covering two 1-3/4" (45mm) lightweight foam main wheels, tail wire skid, lightweight plastic tail wheel, CA hinges and all hardware to complete kit, instruction manual, two full-size plan sheets, acetate sheet for windows and vacuum molded cowl. Specs:
    • Length: 23-7/8" (606mm) • Wingspan: 40" (1016mm) • Wing Area: 272sq.in. (17.57 sq dm) • Airfoil: Flat bottom • Center of Gravity (CG): 1-7/8" (48mm) back from the leading edge of the wing • Control Throws- Elevator, Up and Down: 3/4" (19mm) Rudder, Left and Right: 7/8" (22mm)
Part number(s) included (in factory packaging): 1814

Write a Review